Goods throughput in the port of Rotterdam rose to 118.5 million tonnes in the third quarter, 14.6% more than in the same period last year. Throughput was 350.1 million tonnes through to the end of the third quarter, an increase of 8.6% on 2020.
During that time, there was strong growth in almost all throughput segments, and particularly in mineral oil products (+13.5%), iron ore and scrap metal (+42%), coal (+48.4%) and biomass (+18.7%). Containers are also still on the rise (+4.0% in tonnes, +7.8% in TEUs). The only falls were in agribulk (-12.8%) and LNG (-1.8%).
Allard Castelein, CEO of the Port of Rotterdam Authority: “These quarterly figures show that the economy is continuing its upward path. The whole world was in lockdown last year because of the corona pandemic. Now factories, businesses and logistics are operating flat out again to meet increased demand. However, the extent to which growth will continue also depends on how fast acute shortages in some links of the logistics chain can be reduced. Nevertheless, the port of Rotterdam wants to facilitate this growth as much as possible. We are committed to good jobs for current and future generations, and to future earning capacity in the Netherlands. At the same time, we are investing in the transition to a more sustainable energy system, with more green hydrogen and lower carbon emissions.”
Dry bulk throughput rose more than 27% compared with the first three quarters of 2020. The increase in volume was mainly in iron ore and coal. Iron ore throughput collapsed in 2020 because there was much less demand for steel due to the corona crisis. This year, on the other hand, steel production has risen sharply again. That has also had an impact on the throughput of cokes. Total coal throughput increased by no less than 48.4% over the first nine months of 2020. In particular, the demand for coal for energy production rose sharply as a result of increased demand for energy. Coal-fired power stations have been operating relatively long hours: less wind energy was produced during this period and gas was scarce and expensive.
There was a clear rise in biomass throughput by comparison with 2020, when more biomass was co-fired in coal-fired power stations. Other dry bulk rose by more than 12% compared with the first nine months of 2020. Industrial production and construction have picked up after the corona year 2020, and so demand for raw materials has also increased. Only agribulk volume remained at the same level as last year, when it was precisely the only type of dry bulk that increased. At the time, there was unusually high demand for agricultural goods due to a concern about the threat of stock shortages. This meant that the incoming volume in the last quarter was down on the previous year.
Progress was made again in the third quarter on the energy transition. For example, decisions about the zoning plan and four permit applications for the Porthos project are now available for inspection. Porthos will transport CO2 from the Rotterdam port area and store it in empty gas fields under the North Sea. Shell has started on the construction of a plant in Pernis that will produce 820,000 tonnes of sustainable aviation fuel and renewable diesel from waste each year.
The sustainability of inland navigation also received a boost. On 6 September, Zero Emission Services (ZES) launched the Alphenaar, the first Dutch inland vessel to use exchangeable energy containers for propulsion. The Alphenaar sails between Alphen aan den Rijn and Moerdijk for beer brewer Heineken, the first ZES end client. The energy containers - 'ZESpacks' - are standard 20ft containers filled with batteries charged using green electricity.
ZES was founded in June 2020 by ING, Engie, Wärtsilä and the Port of Rotterdam Authority with support from the Dutch Ministry of Infrastructure and Water Management. The company offers a full range of products and services based on exchangeable battery containers, charging stations, technical support and an innovative payment concept for ship owners. The ambition of ZES is to scale up in the short term and establish thirty zero-emission shipping routes by 2030.
We are also making progress in the field of digitalisation. For example, 80% of the 230,000 port calls the Harbour Master receives annually have now been automated. In September, the Port of Rotterdam Authority installed the world's first 3D-printed steel bollards on the new quay in the Sleepboothaven at Rotterdam Heijplaat. The six bollards are part of a series of twelve 3D-printed bollards that the Port Authority and RAMLAB have developed together. The 3D printing of bollards is part of the infrastructure innovation programme in which the Port Authority aims to improve the construction and use of port infrastructure and make it more sustainable by means of scientific research, innovation and digitalisation.
Port of Rotterdam