Dust control in bulk handling can include many different aspects of site operations. Shiploaders, truck dumping, hoppers, and conveyor transfer points all contribute to dust emissions during handling operations, writes Claire Cowie, WeatherSolve Structures Inc.
 
Typically, dry bulk handling operations have relied on active dust suppression systems such as water sprays, fogging systems, and filtration systems to combat dust control. While these methods are often essential, they fight an uphill battle against site airflow currents and local winds. Fines and small particles are more often than not picked up and carried away before the dust suppression method has a chance to work. The result is a dusty mess.
 
To optimize current dust control measures, operations managers are increasingly looking to structural micro environment solutions (custom-designed fabric cladded structural solutions) such as those developed by WeatherSolve Structures Inc. These structures create a calmed localized ‘micro environment’ to help optimize current dust control solutions and maximize material retention during handling activities. They create a calmed area to support current dust suppression strategies such as improving particle agglomeration with water droplets in fogging systems.
 
COMMON INDUSTRIAL MICRO-ENVIRONMENTS
 
BUILDINGS
Dust generated in enclosed buildings on industrial sites can’t escape. Many sites are plagued with insufficient or ineffective dust control. Often fogging systems are used to minimize dust at the source, but this doesn’t always address the challenge entirely. Dust can also cause strain HVAC units and ventilation systems. It can also lead to very uncomfortable working environments.
 
Although fogging systems can be effective at minimizing dust, this method does not always address the challenge entirely. Many buildings still experience insufficient or inefficient dust control. This is where a micro-environment solution comes into play.
 
Installing a porous fabric wall or walls, such as those engineered by WeatherSolve Structures Inc., allows for air exchange and improved dust suppression. These porous walls help boost the effectiveness of fogging systems while allowing airborne dust to settle. This means:
 
  • effective dust suppression;
  • reduced strain on HVAC units and current ventilation systems;
  • improved visibility;
  • improved regulatory compliance;
  • reduced risk of combustible dust events;
  • improved employee health and safety;
  • and prolonged equipment lifespan.
WeatherSolve Structures Inc. cladding can accommodate most buildings allowing for improved ventilation, airflow, and natural light to shine through. Just in case the thought of rain crossed your mind; you have no need to worry; the proprietary fabric also helps repels the rain so that droplets either slide down the surface or become mist.
 
 
 
FOGGING SYSTEM ENCLOSURES
By enclosing the area around a fogging system with a custom designed wind fence, the wind speeds within the enclosure are drastically reduced preventing both the fog and dust from dispersing in the wind. Typically, the wind speed is decreased by around 80% or so over localized areas.
 
In fact, wind fences have been shown to improve the effectiveness of dry fog control systems especially in areas where ROM bins (dump hoppers) are used[1]. Think ‘increased hang-time’.
 
WeatherSolve Structures has extensive experience implementing wind fence solutions to optimize fogging systems on industrial sites and hoppers. These fences help boost fogging system performance leading to better air quality, improved visibility, and optimized dust control.
 
THE BOTTOM LINE
Using active dust suppression methods on industrial sites may not always provide the most effective dust control. Active dust suppression methods tend to be vulnerable to onsite airflow and wind. By utilizing porous fabric to create a calm micro environment the performance of existing fogging systems, HVAC units, etc… can be optimized. Whether you are shielding a hopper, processing building, or transfer point containment on multiple conveyors, a custom cladding solution might help you achieve better dust abatement.
 
REFERENCES
1. “Using Agglomerative Dust Suppression and Wind Breaks for Fugitive Dust Abatement” Australasian Mine Safety Journal April 17, 2019 https://www.amsj.com.au/ using-dry-fog-dust-suppression-and-wind-breaks-to-control-dust/Accessed Sept 26, 2024.